- The screens themselves are 1960mm long x 630mm high
- The posts are 25mm square box section, 635mm long overall including the plastic end cap.
- The magnets are – 100mm diameter x 22mm deep with a 10mm centre screw / bolt hole ( bolt head space 35mm x 20mm )
- Magnet type – Ferrite C5 – chrome plated, 68kg of pull.
The Welding Curtain Specifications
This material is normally used for welding screens and is formulated with a UV absorber to give absorption greater than 2.5 absorbance units over range 200nm-450nm and 550nm-700nm, minimum at 510nm. This UV absorber assists in the prevention of arc eye/welding glare.It is fire retardant so can protect against grinding sparks, etc., nylon reinforced to give excellent tear resistance and translucent to give two way vision for supervision and safety.
Burst Strength: 825 kN/m2 min.
Breaking Load: L 340 N/5cm min. T 220 N/5cm min.
Tongue Tear: L 130 N min. T 130 N min.
Resistance to flex cracking: 250,000 cycles min.
Cold crack -6oC
This material has been independently tested and certified to British Standard BS EN 1598: 1998 Section 4.4 Resistance to Ignition (Health and Safety in Welding and Allied Processes). All values shown on this data sheet are +/- 10%