• 50 X Tyrolit 4 1/2" X 1MM 1* Cutting Discs
• 10 X Tyrolit 4 1/2" 40 Grit C-TRIM Flap Discs
• 1 X Makita 720W 4 1/2" Angle Grinder
• Free UK Mainland Delivery

• Unbelievable deal.
• 55p per disc for an Austrian made super thin slitting disc.

• Parweld XTS 162 MMA Welder Package W/ TIG Torch, Auto Darkening Helmet, Gloves & Welding Electrodes
• Stick & lift TIG welder W/ cellulosic capabilities (Includes lift TIG torch)
• Perfect for General Fabrication, Farm / Agricultural Work as well as Hobbiests

• SPECIAL OFFER PRICE
• The C-Trim Flap Disc is the new compact edge flap disc from Tyrolit.
• The revolutionary new design with compact flaps and trimmable backing gives the longest lifetime coupled with maximum stock removal.
• The robust construction with an increased number of closely spaced flaps means it can withstand the highest loads and still give an even longer service life.
• For use on stainless steel & mild steel.

• Nozzle mix principle for maximum safety • Backfire resistant design
• Progressive “bleed” characteristics
• Various length options
• 90° and 75° cutting heads • Robust engineering
• All Cutting torches are equally suitable for Acetylene and Propane service simply by changing the nozzle.

• Reinforced palm and thumb
• Double Kevlar stitched
•  'A' Grade leather with a minimum palm thickness of 1.2cm
• Fully lined and fully welted
• Cuff length of 19cm

• Welding Output 200 Amp AC
• Voltages 110/220 Volts
• Socket Configuration 110 Volt 1 x 16 Amp 230 Volt 1 x 16 Amp
• Engine Genuine Honda Engine Model GX390
• Starting System Recoil
• Trolley Dimensions LxWxH (mm) 1006x580x720
• Weight Kg 95
• Duty Cycle 200 Amps @ 35% 170 Amps @ 60%

• Welding Output 200 Amp DC
• Voltages 110/220 Volts
• Socket Configuration 110 Volt 1 x 16 Amp 230 Volt 1 x 16 Amp
• Engine Genuine Honda Engine Model GX390
• Starting System Recoil
• Trolley Dimensions LxWxH (mm) 1006x580x720
• Weight Kg 95
• Duty Cycle 200 Amps @ 35% 170 Amps @ 60%

• 12 Months Interest Free Credit - Apply at Checkout
• Input voltage - 230V 1 Phase 32A/ 400V 3 Phase 20A
• Max severance cut capacity - 31MM
• Clean cut capacity - 22MM
• Pierce capacity - 14MM
• Recommended power output - 8KVA
• Duty cycle at half power or below - 100%
• Duty cycle at full power - 40%
• Cuts steel, stainless steel, aluminium, alloys & copper

• 12 Months Interest Free Credit - Apply at Checkout
• Input voltage - 230V 1 Phase 16A
• Max severance cut capacity - 20MM
• Clean cut capacity - 15MM
• Pierce capacity - 9MM
• Air pressure & flow rate - 60-70PSI & 3CFM
• Duty cycle at half power or below - 100%
• Duty cycle at full power - 40%
• Cuts steel, stainless steel, aluminium, alloys & copper

• 12 Months Interest Free Credit - Apply at Checkout
• Input voltage - 400V 3 Phase 16A
• Max severance cut capacity - 36MM
• Clean cut capacity - 28MM
• Pierce capacity - 16MM
• Air pressure & flow rate - 70PSI & 3.5CFM
• Duty cycle at half power or below - 100%
• Duty cycle at full power - 40%
• Cuts steel, stainless steel, aluminium, alloys & copper

• Weld 15MM Mild Steel
• British Built
• Perfect For General Fabrication & Agricultural Work
• Duty cycle - 35% @ 330A / 60% @ 250A
• Voltage Steps - 16
• Complete With Genuine Binzel Torch   

• Weld 15MM Mild Steel
• British Built
• Perfect For General Fabrication & Agricultural Work
• Duty cycle - 60% @ 250A / 45% @ 290A
• Standard 5M Interconnecting cable
• Voltage Steps - 16
• Complete With Genuine Binzel Torch   
• 

• Weld 20MM Mild Steel
• British Built
• Perfect For General Fabrication & Agricultural Work
• Duty cycle - 60% @ 350A / 45% @ 400A
• Standard 5M Interconnecting cable
• Voltage Steps - 24
• Complete With Genuine Binzel Torch   

• Weld 20MM Mild Steel
• British Built
• Perfect For General Fabrication & Agricultural Work
• Duty cycle 60% @ 350A / 45% @ 400A  
• Voltage Steps - 24
• Complete With Genuine Binzel Torch   

• Will run a 4MM Welding rod on a 13amp supply.
• Arc & Lift TIG
• Generator Friendly 
• 3 Year Return To Base Warranty - "No Quibbles" warranty policy. 
• Ideal For Cellulosic & Rutile Electrodes.on
• Digital Display
• Arc Force / Hot Start / Anti Sticking

• This pair of Panther Driving Gloves are fully lined for added comfort
• Key set thumb for extra movement and flexibility
• A rolled hem and an elasticated back, further ensures comfort and effortless movement whilst at work

• Stand Up Collar
• Adjustable Wrists
• Inside Pocket
• Side Take Up Straps
• Kevlar® Stitched

• Offers Protection From Sparks and Heat Generated From Welding and Industrial Applications,
• Kevlar® Stitched
• Strong Cotton Webbing
• 1.2mm Thick Cow Hide

• Arc & Scratch TIG
• Generator Friendly
• 3 Year Return To Base Warranty - "No Quibbles" warranty policy. Should something go wrong, Parweld will collect the machine, repair it & return it free of charge

• 24 Months Interest Free Credit - Apply at Checkout
• Arc & Lift TIG
• Generator Friendly 
• 3 Year Return To Base Warranty - "No Quibbles" warranty policy. Should something go wrong, Parweld will collect the machine, repair it & return it free of charge
• Ideal For Cellulosic & Rutile Electrodes - The XTS 202' "Multi Mode" allows for smooth running of both rutile & cellulosic electrodes with the press of a button
• Digital Display
• Arc Force / Hot Start / Anti Sticking

• M6 Thread Contact Tip for MB15 & MB25 Torches

• M8 Thread Contact Tip for MB36 Torches

• Binzel style Conical Nozzles for MB15, MB25 & MB36 Torches

• Excellent Mild Steel MMA Electrode
• Easy Strike and Re-Strike
• Good Anti Stick Properties
• Smooth Arc Characteristics
• Suitable for General fabrication, repair & maintenance

• Oustanding mild steel MMA electrode
• Suitable for DIY use & light fabrication
• Easily removeable flux

• Well known as "the best general purpose rod on the market"
• Mild Steel MMA electrode suitable for a wide variety of mild steel fabrication & repair applications
• Exceptional overall operability resulting in high quality welds
• Excellent in the overhead position and for fillet welding in the horizontal vertical position
• Smooth even metal transfer, low spatter and self releasing flux
• Smooth weld bead appearance

Characteristics and typical fields of application 

Rutile-cellulosic electrode engineered for easy operating in all positions including vertical down. 

• Excellent welding properties in AC polarity.
• Good striking and restriking characteristic.
• Sound penetration and flat beads.
• Popular for general steel construction.

• Brilliant 7018 Mild Steel MMA Electrode
• Low Hydrogen
• High Tensile Strength

• Pure Nickel Cast Iron MMA Electrode
• Suitable for repair & maintance work on all cast iron

• Fits inside most helmets with internal clip in bracket to magnify the work area
• 0.75 Diopter Magnifications available
• Welding Helmet Magnifier Lens Plate (Cheater Plate, Mag Lens)
• Helpful accessory that fits indide the welding helmet/shield/mask/hood.
• Magnifies the work area for easier and more accurate welds. 

• Fits inside most helmets with internal clip in bracket to magnify the work area
• 1.0 Diopter Magnifications available
• Welding Helmet Magnifier Lens Plate (Cheater Plate, Mag Lens)
• Helpful accessory that fits indide the welding helmet/shield/mask/hood.
• Magnifies the work area for easier and more accurate welds. 

• Fits inside most helmets with internal clip in bracket to magnify the work area
• 1.25 Diopter Magnifications available
• Welding Helmet Magnifier Lens Plate (Cheater Plate, Mag Lens)
• Helpful accessory that fits indide the welding helmet/shield/mask/hood.
• Magnifies the work area for easier and more accurate welds. 

• Fits inside most helmets with internal clip in bracket to magnify the work area
• 1.5 Diopter Magnifications available
• Welding Helmet Magnifier Lens Plate (Cheater Plate, Mag Lens)
• Helpful accessory that fits indide the welding helmet/shield/mask/hood.
• Magnifies the work area for easier and more accurate welds. 

• Fits inside most helmets with internal clip in bracket to magnify the work area
• 1.75 Diopter Magnifications available
• Welding Helmet Magnifier Lens Plate (Cheater Plate, Mag Lens)
• Helpful accessory that fits indide the welding helmet/shield/mask/hood.
• Magnifies the work area for easier and more accurate welds. 

• Fits inside most helmets with internal clip in bracket to magnify the work area
• 2.0 Diopter Magnifications available
• Welding Helmet Magnifier Lens Plate (Cheater Plate, Mag Lens)
• Helpful accessory that fits indide the welding helmet/shield/mask/hood.
• Magnifies the work area for easier and more accurate welds. 

• Fits inside most helmets with internal clip in bracket to magnify the work area
• 2.25 Diopter Magnifications available
• Welding Helmet Magnifier Lens Plate (Cheater Plate, Mag Lens)
• Helpful accessory that fits indide the welding helmet/shield/mask/hood.
• Magnifies the work area for easier and more accurate welds. 

• Fits inside most helmets with internal clip in bracket to magnify the work area
• 2.5 Diopter Magnifications available
• Welding Helmet Magnifier Lens Plate (Cheater Plate, Mag Lens)
• Helpful accessory that fits indide the welding helmet/shield/mask/hood.
• Magnifies the work area for easier and more accurate welds. 

• Fits inside most helmets with internal clip in bracket to magnify the work area
• 2.5 Diopter Magnifications available
• Welding Helmet Magnifier Lens Plate (Cheater Plate, Mag Lens)
• Helpful accessory that fits indide the welding helmet/shield/mask/hood.
• Magnifies the work area for easier and more accurate welds. 

• Fits inside most helmets with internal clip in bracket to magnify the work area
• 3.0 Diopter Magnifications available
• Welding Helmet Magnifier Lens Plate (Cheater Plate, Mag Lens)
• Helpful accessory that fits indide the welding helmet/shield/mask/hood.
• Magnifies the work area for easier and more accurate welds. 

• Premium Slitting Disc
• Enhanced economic efficiency
• Maximum comfort while working
• Reduced working times

• 5'' slitting discs for thin walled metal sheets.
• Suitable for rusty and acid resistant steels.
• Produce less heat.

• 9'' slitting discs for thin walled metal sheets.
• Suitable for rusty and acid resistant steels.
• Produce less heat.

• 4.1/2'' slitting discs for thin walled metal sheets.
• Suitable for rusty and acid resistant steels.
• Produce less heat.

• Premium Slitting Disc
• Enhanced economic efficiency
• Maximum comfort while working
• Reduced working times

• Premium Slitting Disc
• Enhanced economic efficiency
• Maximum comfort while working
• Reduced working times

• Enhanced economic efficiency
• Universal use
• Individual application

• Enhanced economic efficiency
• Universal use
• Individual application

• Enhanced economic efficiency
• Universal use
• Individual application

• Enhanced economic efficiency
• Universal use
• Individual application

• Enhanced economic efficiency
• Less work required
• Enhanced comfort while working

• Enhanced economic efficiency
• Less work required
• Enhanced comfort while working

• Enhanced economic efficiency
• Less work required
• Enhanced comfort while working

• 40 grit Disc.
• The Standard** flap disc is available in all current diameters and grain sizes.
• Achieves very good results both on steel and stainless steel. 
• Effortless machining of welding seams as well as edge grinding and surface grinding. 

• 60 grit Disc.
• The Standard** flap disc is available in all current diameters and grain sizes.
• Achieves very good results both on steel and stainless steel. 
• Effortless machining of welding seams as well as edge grinding and surface grinding. 

• 80 grit Disc.
• The Standard** flap disc is available in all current diameters and grain sizes.
• Achieves very good results both on steel and stainless steel. 
• Effortless machining of welding seams as well as edge grinding and surface grinding. 

• 120 grit Disc.
• The Standard** flap disc is available in all current diameters and grain sizes.
• Achieves very good results both on steel and stainless steel. 
• Effortless machining of welding seams as well as edge grinding and surface grinding. 

• 40 grit Disc.
• The Standard** flap disc is available in all current diameters and grain sizes.
• Achieves very good results both on steel and stainless steel. 
• Effortless machining of welding seams as well as edge grinding and surface grinding. 

• 60 grit Disc.
• The Standard** flap disc is available in all current diameters and grain sizes.
• Achieves very good results both on steel and stainless steel. 
• Effortless machining of welding seams as well as edge grinding and surface grinding. 

• 80 grit Disc.
• The Standard** flap disc is available in all current diameters and grain sizes.
• Achieves very good results both on steel and stainless steel. 
• Effortless machining of welding seams as well as edge grinding and surface grinding.