FEMI N310 DA DG Stationary Bandsaw - 400V

The FEMI N310 DA DG is a stationary workstyle style metal cutting bandsaw that runs on a 400V 3 phase input supply. This machine is made for use in heavy industrial cutting applications such as structural steel This machine is made in FEMI's factory in Italy and is capable of a maximum cut capacity of 320MM. It is capable of mitred cuts in both directions, capacities are as follows:

Round pipe:

• 45 degree mitre up to 205MM
• 45 SX degree mitre up to 205MM
• 60 SX degree up to 125MM

Square box section:

• 45 degree mitre up to 175MM x 175MM
• 45 SX degree mitre up to 175MM x 175MM
• 60 degree SX mitre up to 125MM x 125MM

Rectangular box section:

• 45 degree mitre up to 170MM x 190MM
• 45 degree SX mitre up to 210MM x 80MM
• 60 degree SX mitre up to 120MM x 135MM

It can make none mitred cuts on up to 320MM x 200MM rectangular box section, 255MM round pipe & 195MM x 195MM box section.

This machine boasts an automatic indepent down feed which means you do not need to pull the column down as you cut. This is a great advantage when repeated cuts are necessary.

Technical Specifications

• Blade length - 2750MM
• Motor power - 1000/1500W
• Input voltage - 400V
• Weight - 344KG
• Blade speed - 2 speed
• Toothing - 6/10
• Lubrication required - Yes

Key Features

• Powerful 2 speed three phase motor with oil lubricated gear box
• Arm, vice and swivel made in cast iron
• Side sliding vice and cut up to 45 degree with 45 degree right and up to 60 degree left
• Blade tensioning level pressure gauge
• Sliding blade guide
• Electric / hydraulic front panel
• Thermic protection
• End-cut switch
• Blade cleaning brush