S-Spray

Control Valve and Flow Indicator for use with 12 Litre can. 

Flow Rate Nominally

Trigger activator allows better control of flow than a standard Aerosol button

Material

plastic mechanism with nickel-plated brass nozzle

Tubing

8 inches tubing Supplied as standard

Gasses Used for

Non-Reactive Gases

Part Code 

S-Spray

S-Flow

Control Valve and Flow Indicator for use with 12 Litre can. 

Flow Rate Nominally

0.5 lpm on bottom line

1.0 lpm on top line

Material

 Nickle plated Brass and Perspex

Tubing

8 inches tubing Supplied as standard

Gasses Used for

Non-Reactive Gases

Part Code 

S-FLOW-FM

 S-Flow Barbed Screw

Control Valve for direct connection into equipment for use with 12l can

Flow Rate Nominally

0.5 lpm on bottom line 

1.0 lpm on top line

Tubing

8 inches tubing Supplied as standard

Material

Nickel plated brass 

Gas Use For

Non Reactive Gas

Part Code 

S-flow-SC

 S-Flow Spectrum

Control Valve for with septum for syringe use. For use with 12l can

Flow Rate Nominally

0.5 lpm on bottom line

1.0 lpm on top line

Tubing

8 inches tubing Supplied as standard

Material

Nickel plated brass 

Part Code 

S-FLOW-SEPT

S Flow Demand

Control Valve with flowmeter and pressure gauge. For use with 12l can 

Flow Rate Nominally

N/A

Material

Nickle Plated Brass

Tubing

8 inches tubing Supplied as standard

Gases Used for

Non-Reactive

Part Code

S-FLOW-DF

S Flow with C10 Connector

For use with 34, 58 cans

Flow Rate Nominally

N/A

Gas Used

Non-Reactive

Tubing

8 inches tubing Supplied as standard

Part Code 

S-FLOW-C10

S-Reg

Flow Control Regulator c/w pressure gauge for use with 34, 58 & 110 Litre cylinders.

Flow Rate Nominally

0.3, 0.5, 1.0, 1.5, 2.5, 3.0 lpm

Pressure Gauge

0-1000 psi

Inlet

5/8" - 18 UNF (C10) Male

Outlet

6mm Barbed fitting

Material

Nickel coated brass 

(Stainless steel regulators available for very Reactive gases)

Part Code 

S-REG-ST-0.1, 0.5

S-Reg Push Button

Brass Reg with push button to activate regulator dispensing gas at a pre-set flow rate. For use with 34, 58 & 110 Litre cylinders.

Flow Rate Nominally

0.3, 0.5, 1.0, 1.5, 2.5, 3.0 lpm

Pressure Gauge

1000 PSIG Max

Gases used for 

Non-reactive, H2S and SO2

Material

Nickel coated brass 

Part Code 

S-REG-PB

S Reg Trigger

Designed to provide aerosol capability. For use with 34, 58 & 110 Litre cylinders

Flow Rate Nominally

Dispenses gas at 0.5L per minute flow rate. Trigger can also be locked in the “on” position for continuous gas flow

Material

Nickle Plated Brass

Tubing

Not supplied as standard - needs to be ordered separately in 1m lengths

Gases Used for

Non-Reactive H2S, SO2

Part Code

S-FLOW-TRIG

S Reg Stainless Steel

Designed for use with reactive gases. For use with 34, 58 & 110 Litre cylinders

Flow Rate Nominally

0.5, 1.0, 1.5, 2.5, 3.0 lpm

Material

Stainless Steel

Tubing

Not supplied as standard - needs to be ordered separately in 1m lengths

Gases Used for

Very Reactive

Part Code

S-FLOW-SS

DF Reg

Demand flow regulator for use with instruments containing internal sample pumps. For use with 34, 58 & 110 Litre cylinders

Flow Rate Nominally

0-1.5 lpm

Material

Nickle Plated Brass (Bonnet – Aluminium)

Tubing

Not supplied as standard – needs to be ordered separately in 1m lengths

Pressure Gauge

0 - 1000 psi (68 Bar)

Gases Used for

Non-Reactive H2S, SO2

Part Code

DFR-REG-C10

DFR HP

Demand flow regulator for use with instruments containing internal sample pumps. Supplied with BS3 valve as standard. BS4 also available

Flow Rate Nominally

For use with High Pressure Cylinders

Material

Nickle Plated Brass (Bonnet – Aluminium)

Tubing

Not supplied as standard – needs to be ordered separately in 1m lengths

Pressure Gauge

0-150 Bar

Gases Used for

Non-Reactive H2S, SO2

Part Code

DFR-REG-HP

Press Reg

Pressure Regulator (single Stage) when outlet pressure is required to be controlled. Supplied with cylinder and Outlet Pressure. For use with 34, 58 & 110 Litre cylinders

Flow Rate Nominally

Material

Tubing

Not supplied as standard – needs to be ordered separately in 1m lengths

Pressure Gauge

0-100 Bar inlet       0-3 Bar outlet

Gases Used for

Non-reactive mixtures

Part Code

PRESS-REG

Multi Flow 0-3LPM

Flow Control Regulator c/w pressure gauge

For use with 34, 58 & 110 Litre cylinders 

Flow Rate Nominally

0-3lpm

Material

Nickle plated Brass

Tubing

Not supplied as standard – needs to be ordered separately in 1m lengths

Pressure Gauge

4000 (psig) MAX

Gases Used for

Non-Reactive H2S, SO2

Part Code

M-FLOW-0-3

Multi Flow 0-5LPM

Flow Control Regulator c/w pressure gauge

For use with 34, 58 & 110 Litre cylinders 

Flow Rate Nominally

0-5lpm

Material

Nickle plated Brass

Tubing

Not supplied as standard – needs to be ordered separately in 1m lengths

Pressure Gauge

4000 (psig) MAX

Gases Used for

Non-Reactive H2S, SO2

Part Code

M-FLOW-0-5

Multi Flow SS 0-3LPM

Flow Control Regulator c/w pressure gauge

For use with 34, 58 & 110 Litre cylinders 

Flow Rate Nominally

0-3lpm

Material

Stainless Steel

Tubing

Not supplied as standard – needs to be ordered separately in 1m lengths

Pressure Gauge

4000 (psig) MAX

Gases Used for

Very Reactive

Part Code

M-FLOWSS-0-3

S Reg CGA 600

Brass reg for use with non-reactives in 34L steel cylinders. Flow Control Regulator with pressure gauge, 0.5lpm

Flow Rate Nominally

0-5lpm

Material

Stainless Steel

Tubing

Not supplied as standard – needs to be ordered separately in 1m lengths

Pressure Gauge

Brass 28 bar max

Gases Used for

Non-Reactive

Part Code

S-REG-CGA600-0.5